PDA

View Full Version : Complete 3 axis and spindle motor CNC system.


molliemilo1
24-01-2021, 07:59 PM
Adtech (Chinese) industrial CNC system c/w 2.2Kw servo motor and driver for spindle,2 off 1.8Kw servo motors and drivers for X and Y axis and a 750W servo motor and driver for the Z axis (all servos and drivers are AC).Also comes with main console and sub console with an MPG.input and output boards, and all cables and fittings.Would make an excellent retrofit for a BP interact.Originally purchased for a BP EZI TRAK,but changed to another system as I wanted A,B and C axes.
Never ran,but shop soiled as it has been on the shelf for a couple of years.All manuals and instructions included.Looking for £1000.
Chaz
25-01-2021, 03:32 PM
What model number is the controller? Willing to split any of the system?
molliemilo1
25-01-2021, 08:17 PM
What model number is the controller? Willing to split any of the system?

ADT-CNC4640 is the controller (£790 + VAT to buy new).
FCNC4M Additional panel.
CNC4A MPG.

Would split if had a decent enough offer but, am only asking £1000 for the whole bundle.
Chaz
26-01-2021, 05:30 PM
ADT-CNC4640 is the controller (£790 + VAT to buy new).
FCNC4M Additional panel.
CNC4A MPG.

Would split if had a decent enough offer but, am only asking £1000 for the whole bundle.

Understood, not a bad price. Problem is, I dont need all of it. I'm primarily after the spindle motor / setup to see if I can upgrade my Bridgeport with, the other stuff Ill make use of as needed - the control might be interesting but just invested in SGHZ stuff for my lathe (similar setup) but would remain with them most likely for my next upgrade / retrofit.

Let me think about it.

Thanks
molliemilo1
26-01-2021, 07:58 PM
Will put on Ebay.The 2.2kw spindle motor is mounted on a motor plate that fits a Bridgeport BR2J head with a motor driven 10M pulley of 72 teeth driving a spindle pulley of 36 10m teeth,which gives a 2:1 ratio.Motor running at 60hz will give 3600rpm at spindle (approx.).
Chaz
29-01-2021, 05:27 PM
Just looking at this again. Can you send me some info about the spindle system please?

Is it similar (or the same) as this?

https://www.szghauto.com/product/93.html
molliemilo1
31-01-2021, 09:17 AM
CNC system now sold.