Murphy
25-01-2021, 07:29 PM
Hi, I am a new member and need advice on upgrading my Makita router to a water-cooled spindle, I have built my own CNC which is 1605 screw drive with linear rails and blocks, I have been reading up on spindles, and the water-cooled seems to be favoured to air-cooled, I mostly do 3D clipart at the moment, I have looked at CNC4YOU spindles and they cost about £500 with VAT and postage, I have been told that some Chinese spindles are good, but which ones does anyone have any information on which spindle I should get