Nickn
04-02-2021, 04:22 PM
Hi,
I am hoping someone can help me, it would be much appreciated!
I have been milling 3D models created in Rhino and imported into Vcarve pro in STL format. When I import it converts to a pixelated model even in high res (50X slower setting).
The problem I am having is when I mill the file the cutter moves very slowly in a jerky movement around the pockets of the roughing toolpath and some finishing toolpaths, only on curves, it cuts fast in a straight line. It seems the CNC is reading the jagged edge of the pixelated 3D model?
Is there a setting or set up that would solve this?
Thanks
Nick
I am hoping someone can help me, it would be much appreciated!
I have been milling 3D models created in Rhino and imported into Vcarve pro in STL format. When I import it converts to a pixelated model even in high res (50X slower setting).
The problem I am having is when I mill the file the cutter moves very slowly in a jerky movement around the pockets of the roughing toolpath and some finishing toolpaths, only on curves, it cuts fast in a straight line. It seems the CNC is reading the jagged edge of the pixelated 3D model?
Is there a setting or set up that would solve this?
Thanks
Nick