dickydom
06-02-2021, 06:51 PM
For sale is my newly built CNC router, cutting area is 530mm X 810mm X 180mm
It has a 2.2 kW water cooled spindle, Hiwin cariages and anti backlash lead screws. 4Nm stepper motors. All box section is 80*80mm mild steel box. Extrusion is 80*80 for Y axis and 80*160 for X axis. Comes with a Masso G3 controller and pendant but I would be willing to split if buyer has their own preferred controller.
This was all built and assembled by myself in september/august 2020. Unfortunately the project has to be shelved due to coronavirus and the funds are required elsewhere. The machine has done nothing other than a few test cuts and run through calibration/squaring/tramming etc. I am looking to get my money back for the parts (minus the steel) that's all.
£3500 or £2900 without controller/pendant. Screen/keyboard not included.
Please call 07456 869 842 or email [email protected] with enquiries
It has a 2.2 kW water cooled spindle, Hiwin cariages and anti backlash lead screws. 4Nm stepper motors. All box section is 80*80mm mild steel box. Extrusion is 80*80 for Y axis and 80*160 for X axis. Comes with a Masso G3 controller and pendant but I would be willing to split if buyer has their own preferred controller.
This was all built and assembled by myself in september/august 2020. Unfortunately the project has to be shelved due to coronavirus and the funds are required elsewhere. The machine has done nothing other than a few test cuts and run through calibration/squaring/tramming etc. I am looking to get my money back for the parts (minus the steel) that's all.
£3500 or £2900 without controller/pendant. Screen/keyboard not included.
Please call 07456 869 842 or email [email protected] with enquiries