Denford Cyclone

[m_c]

I'm needing workshop space, so I'm selling my Cyclone.

It's one with a larger 160mm chuck and corresponding 6 position turret.
Originally it was a stepper driven PC controlled lathe, but I converted it with two Kinco servos (750W on the Z, and 400W on the X), and a Dynomotion KFlop/Kanalog combination.

It currently requires both 240V single phase (for the servos, and control electrics), and 415V three phase (for the spindle, turret and coolant pump).

Looking for £3000 as it stands.

[m_c]

Just remembered I hadn't added any photos to this.
I'd add some current photos of the control cabinet, but the lathe is currently sat where I can't get it open.

30130
30131
30132

[Johanlevin]

Hey, I´m interasted in you machine:) You still has it?

Best Regards Johan L

[Pencilfish]

Hello, this looks quite interesting. Is it still for sale? If so, is it able to cut threads? If you're not too far from Edinburgh, might be interested in coming and taking a look :)

Robbie

[Jink123]

I'm needing workshop space, so I'm selling my Cyclone.

It's one with a larger 160mm chuck and corresponding 6 position turret.
Originally it was a stepper driven PC controlled lathe, but I converted it with two Kinco servos (750W on the Z, and 400W on the X), and a Dynomotion KFlop/Kanalog combination.

It currently requires both 240V single phase (for the servos, and control electrics), and 415V three phase (for the spindle, turret and coolant pump).

Looking for £3000 as it stands.

Still available??

[m_c]

This is already sold.

I thought I had marked it as sold but obviously not :/