Rojo
04-07-2021, 09:56 PM
FADAL VMC15 CNC VERTICAL MACHINING CENTER
see this facebook link to see pics ( https://www.facebook.com/marketplace/item/349256296560538/?ref=search&referral_code=marketplace_search&referral_story_type=post&tracking=browse_serp%3Af0e65eb3-e9d6-4353-b745-71220f45521a )301723017230172
Year 1995
Serial No 9412523
Fadal #88HS CNC Control
Table Dimensions 16" x 29.5"
Table Load Capacity 750 LBS
X axis travel 20"
Y axis travel 16"
Z axis travel 20"
Spindle taper BT40
Spindle Speeds, Range 0-7500 RPM
Rapid Traverse Rate 400 IPM
Tool changer capacity 21
Tool Change type Carousel
Spindle Nose to Table 4" to 24"
Spindle CL to Column 17"
Tool Diameter, Max 3"
Tool Length, Maximum 15"
Tool Weight, Maximum 15 LBS
Feed Rate, Range .O1 to 250 IPM
Weight approximately 5500 LBS
Coolant Flood
Rigid tapping Yes
Expanded memory 384k
Comes with 17 LAIP tool holders, all of which are usable but have minor corrosion on them due to the poor coolant mix from the previous owner. Also has the original users and maintenance manual. The coolant tank, pump and grills are included but just not in the pics.
As can been seen by the pics the machine has been well used but the work it did was of a light nature making electrical faceplates and engraving in thin gauge aluminium and plastics.
The mill has been run up and works as it should, I have partially cleaned it but it could really do with having a deep clean as I did on my own machine, cleaning was not a strong point with the previous owner. Any inspection / test is welcome.
The mill is currently located at my work RH17 West Sussex UK
Looking for £3500
Collection to be arranged by the buyer, you will need a lorry with a hiab for transport, will move to a suitable place for collection.
see this facebook link to see pics ( https://www.facebook.com/marketplace/item/349256296560538/?ref=search&referral_code=marketplace_search&referral_story_type=post&tracking=browse_serp%3Af0e65eb3-e9d6-4353-b745-71220f45521a )301723017230172
Year 1995
Serial No 9412523
Fadal #88HS CNC Control
Table Dimensions 16" x 29.5"
Table Load Capacity 750 LBS
X axis travel 20"
Y axis travel 16"
Z axis travel 20"
Spindle taper BT40
Spindle Speeds, Range 0-7500 RPM
Rapid Traverse Rate 400 IPM
Tool changer capacity 21
Tool Change type Carousel
Spindle Nose to Table 4" to 24"
Spindle CL to Column 17"
Tool Diameter, Max 3"
Tool Length, Maximum 15"
Tool Weight, Maximum 15 LBS
Feed Rate, Range .O1 to 250 IPM
Weight approximately 5500 LBS
Coolant Flood
Rigid tapping Yes
Expanded memory 384k
Comes with 17 LAIP tool holders, all of which are usable but have minor corrosion on them due to the poor coolant mix from the previous owner. Also has the original users and maintenance manual. The coolant tank, pump and grills are included but just not in the pics.
As can been seen by the pics the machine has been well used but the work it did was of a light nature making electrical faceplates and engraving in thin gauge aluminium and plastics.
The mill has been run up and works as it should, I have partially cleaned it but it could really do with having a deep clean as I did on my own machine, cleaning was not a strong point with the previous owner. Any inspection / test is welcome.
The mill is currently located at my work RH17 West Sussex UK
Looking for £3500
Collection to be arranged by the buyer, you will need a lorry with a hiab for transport, will move to a suitable place for collection.