jbanfie
23-07-2021, 01:29 PM
30286
ALREADY SOLD - took 4 hours!!!!!
Hi - I've an opportunity to buy a series 3 Tormach with tool changer and 4th axis, so my trusty Series 1 is for sale.
I bought this new in 2007 from the USA and it has been used to build 7 1/4 steam locomotive with only 'hard labour' on cast iron - which cuts like butter!
Series 2 spindle upgrade gives speeds from 100 to 5140rpm.
I would roughly - very roughly think the machine has less than 2000 hours activity and is in very good order, if a little dirty!
I'll supply the stand, the computer running MACH 3 and Sprutcam version 7 - you'd need to add CAD to draw parts.
I'll also provide some training as part of the handover so you wouldn't be flying blind.
Tooling - very little as I'll need it for my next machine, but I'll supply the R8 to Tormach Tooling System (TTS) collet and a single TTS ER20 collet holder, but no collets.
£4000 - buyer arranges removal and collection.
EDIT: - Located Wincanton, Somerset
Cheers
Jon
ALREADY SOLD - took 4 hours!!!!!
Hi - I've an opportunity to buy a series 3 Tormach with tool changer and 4th axis, so my trusty Series 1 is for sale.
I bought this new in 2007 from the USA and it has been used to build 7 1/4 steam locomotive with only 'hard labour' on cast iron - which cuts like butter!
Series 2 spindle upgrade gives speeds from 100 to 5140rpm.
I would roughly - very roughly think the machine has less than 2000 hours activity and is in very good order, if a little dirty!
I'll supply the stand, the computer running MACH 3 and Sprutcam version 7 - you'd need to add CAD to draw parts.
I'll also provide some training as part of the handover so you wouldn't be flying blind.
Tooling - very little as I'll need it for my next machine, but I'll supply the R8 to Tormach Tooling System (TTS) collet and a single TTS ER20 collet holder, but no collets.
£4000 - buyer arranges removal and collection.
EDIT: - Located Wincanton, Somerset
Cheers
Jon