JasonT
29-07-2021, 01:31 PM
30306
The mill is quite small and compact and has had an enclosure built to contain a coolant system.
Its dimensions are 1500mm x 1500mm x 1800mm, weight estimated to be 750kg,it will fit neater into a corner as its actually T shaped.
The mill is running Linuxcnc/pathpilot. The original parts are being sent with the machine should someone at a later date wish to put the mill back to its original manual machine configuration and include the planer and multi axis head attachments.
MT3 tooling, manuals/documentation and spares included. It has been and still is a much loved little machine. An attempt was made at building a power drawbar and a 4th axis sadly project are not quite complete, needs some tlc. However the control cabinet has been wired to operate the 4th axis
The mill has a 3 phase inverter for the 2.2 kw spindle motor fitted and runs from a single 220v socket. The spindle is an MT3 taper and runs up to 7000 rpm.
30307
30308
The mill is quite small and compact and has had an enclosure built to contain a coolant system.
Its dimensions are 1500mm x 1500mm x 1800mm, weight estimated to be 750kg,it will fit neater into a corner as its actually T shaped.
The mill is running Linuxcnc/pathpilot. The original parts are being sent with the machine should someone at a later date wish to put the mill back to its original manual machine configuration and include the planer and multi axis head attachments.
MT3 tooling, manuals/documentation and spares included. It has been and still is a much loved little machine. An attempt was made at building a power drawbar and a 4th axis sadly project are not quite complete, needs some tlc. However the control cabinet has been wired to operate the 4th axis
The mill has a 3 phase inverter for the 2.2 kw spindle motor fitted and runs from a single 220v socket. The spindle is an MT3 taper and runs up to 7000 rpm.
30307
30308