View Full Version : slaved axis in Mach3
erniehatt
12-09-2021, 12:26 AM
when I slave motors in Mach3 and go to e steps configuration, do I have to config both motors separately or will Mach3 work that out, probably a silly question.
JAZZCNC
12-09-2021, 06:37 PM
when I slave motors in Mach3 and go to e steps configuration, do I have to config both motors separately or will Mach3 work that out, probably a silly question.
Yes, you have to set both axis to the same steps per settings.
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.