PDA

View Full Version : Identifying help on a capacitor



RobC
28-11-2021, 09:07 PM
Hello all.

I'm trying to identify the correct values for this capacitor. It's a 2 spade pin capacitor from a motor on a compressor I acquired and I'm trying to get it back to a fit state to use. There's so many out there but they are 4 pins and I don't want to fit the wrong one.

30682

Rob

m_c
28-11-2021, 09:28 PM
You're going to have to do some guess work, as it looks like the capacity and voltage markings have worn off.
I'd guess there are probably guides for capacitor sizing if you know the rating of the motor.

The number of connectors won't make any difference to how it functions, as 4 spades just means each of the terminals has two connectors.

the great waldo
29-11-2021, 12:08 PM
This might help.
https://www.js-technik.de/en/faq/detail/groupid/5/id/2.
Cheers Andrew

BeagleBrainz
29-11-2021, 12:15 PM
Some info about sizing
https://inspectapedia.com/electric/Motor_Capacitor_Selection.php

RobC
29-11-2021, 06:55 PM
So its a 2hp motor. Would a 240v 500-580 µF be the correct one for it?

the great waldo
29-11-2021, 07:58 PM
So its a 2hp motor. Would a 240v 500-580 µF be the correct one for it?40-50 uf should do the job. Don't forget to get the voltage right.
Cheers.
Andrew


Sent from my XT1580 using Tapatalk