PDA

View Full Version : NEW MEMBER: Hello from West Cork, Ireland.



Hatchett Job
25-03-2022, 08:44 PM
Hello all...

I've just finished my new self build 8x4' CNC router after running my last self build 4x2' machine for the last few years.
What image hosting site would you guys recommend so I can put some pics of it up here?
I'm having some fairly major problems debugging it to get it running properly which I hopes folks on here will be able to help with.

All the best
Toby

AndyGuid
27-03-2022, 02:51 AM
Welcome to the forum Toby.
There are plenty of very helpful souls on here who seem able to solve virtually any problem going.

I do think you'd do get a FAR better response if you post your pictures directly into your posts on this forum rather than just a link to some imaging hosting site that many people will be unfamiliar with.

Cheers, Andy

Hatchett Job
27-03-2022, 10:59 AM
Thanks Andy.
It's been a while since I was on any forums so I'm a bit rusty with the photo stuff, I'll give it another go.

Hatchett Job
27-03-2022, 11:06 AM
https://i.imgur.com/XF6TNfy.jpg
https://i.imgur.com/MnfP59H.jpg
https://i.imgur.com/3mOvkc5.jpg

Cormac
11-04-2022, 05:13 PM
Dear Toby,
I'm even newer than you: just signed up. Sorry I can't help with your query, but can you help me please? I don't know to make my first post, to see if I can get help with a Pacer Cadet router. How to post?! Thank you and Best regards, Cormac Lalor, Cork. 086-8138667

Hatchett Job
12-04-2022, 08:38 AM
Hi Cormac...I think your first couple of posts are reviewed by the admin before they go up live.