View Full Version : kvara PLC error e100d

Michael kenny
25-04-2022, 08:21 PM
Hello i was hoping someone could me. I have a 2012 pratix s15 router and when i turned on thursday morning last the handcontroller would not connect to the kvara plc in the machine. The error is E100d. its a esa s500 rack cnc post processer. could it be a plc card issue im at a loss. Any ideas would be greatly appreciated. Thanks

26-04-2022, 09:56 PM
Hi Kenny,

Sorry to be the bearer of bad news but you are not going to get much help around here because very few have experience with machines like the SCM and even if they did I suspect you'll find they couldn't help because they wouldn't know the PLC ladder. This is something you would probably only get from SCM directly or an SCM engineer and in my experience, they don't give info like this away for free.

Good luck