View Full Version : Surfacing burn
Andrew C
01-07-2022, 11:38 AM
Help I am surfacing some Ash across grain and its burning, bit is 28.5 Amana 16000rpm stepover 40% speed rate 35 inch per min. Only used the amana bit once or twice. Please help
Clive S
01-07-2022, 11:50 AM
Help I am surfacing some Ash across grain and its burning, bit is 28.5 Amana 16000rpm stepover 40% speed rate 35 inch per min. Only used the amana bit once or twice. Please help
To me it looks like you are going to slow with the feed rate
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.