Isel GFM 4433 mill for sale

[Buckis]

Hello, I would like to offer my isel gfm 4433 for sale, at the moment machine under maintenance, will clean as much as I can, was converted by me to CS-lab controller, has simcnc license, or you can configure to mach3/4, has CS-lab pendant and runs on pi400. Has custom fixture with clamping system made by myself, have original ballsscrew but never fitted1.5kw water cooled spindle and closed loop steppers, spare power supply, asking 1500£ for quick sale, location Dartford London, was running with Solidworks and SIMcnc, front panel comes with machine but I newer fitted, wireless tools sensor included. At the moment machine at the storage with top lid disassembled some perplex needs replacing


31969

31970

31971

31972

31973

[Buckis]

Have some pictures but can't upload over mobile

[Maxiscnc]

Hello. Sorry to post outside of your for sale ad, but I have a question. I am in the final stages of converting my GFM 4433 with a Centroid Acorn and a Gecko G540. I wanted to do with a closed loop steppers but the space inside the aluminum profile seemed very limited. Were you able to fit motors inside or did you mount them outside the profile? Thanks and good luck selling this great little machine

[Buckis]

Depends on your step servo dimensions you can fit inside, in my case I managed to fit inside original extrusion, just you need to order some original pulleys as they with collets or adopt after market, if you need some info let me know, the dealer shop really helpful and really polite, I am poor man but at least for me original isel parts was with good price

[John W]

Hi There, I know I'm late, did you ever sell your machine? I might be interested.
Many thanks, John.

[Buckis]

Hi There, I know I'm late, did you ever sell your machine? I might be interested.
Many thanks, John.
Hy, it's still available never got chance to get on, so it's in storage

[Buckis]

Just uploaded some pictures