Marktiff
06-09-2022, 10:04 PM
Hi
Does anybody know if it is possible to run the same pgm
And tandem load on the scm m100 on zone AB & DC
Without it mirroring. In this instance I want to machine the
Same door on both zones so at the moment if I machine a door with left handed hinges in zone AB and run the same pgm in zone DC it mirrors it
And it becomes a RH handed door which is fine in some cases
I might want that sometimes but l also would like to be able to turn the mirror of so i could run the same pgm in both
Zones and get the same result in both zones without it mirroring
Is this possible.
Does anybody know if it is possible to run the same pgm
And tandem load on the scm m100 on zone AB & DC
Without it mirroring. In this instance I want to machine the
Same door on both zones so at the moment if I machine a door with left handed hinges in zone AB and run the same pgm in zone DC it mirrors it
And it becomes a RH handed door which is fine in some cases
I might want that sometimes but l also would like to be able to turn the mirror of so i could run the same pgm in both
Zones and get the same result in both zones without it mirroring
Is this possible.