AlastairMacGregor
19-09-2022, 11:30 AM
Used Tormach PCNC 770 Series 3 vertical CNC milling machine (230V single phase) for sale in the UK.
Purchased directly from Tormach in the US and imported new to the UK in 2017, light hobby use only in heated/insulated garage. Machine is in good condition and comes with everything required to make parts including optional power draw bar for easy tool changes, Tormach PathPilot controller (including touch screen monitor,) FogBuster coolant system, Saunders Machine Works tooling plate, Metric Haimer 3d Sensor and lots of TTS tooling (including SuperFly, Tension/Compression Tapping head, extensive ER collets and more), Tormach TTS height gauge, lifting kit, full spares kit, etc. I am only selling as I haven't used the Tormach since upgrading to a Datron Neo so I'd rather it found a new home. This is an ideal first machine to get started with CNC machining at home, and is capable of light production in a variety of materials including aluminium, steel, titanium etc.
The milling machine is mounted on the official Tormach base, and a DIY enclosure (constructed from Rexroth 30mm aluminium extrusion, polycarbonate sheet and plywood panels) is included.
The PCNC 770 Series 3 runs on 110V internally; 230V transformer included.
Local collection only although I can assist with loading onto a suitable vehicle.
Please get in touch if you'd like more photos, or a video walk-around/demonstration.
£8000 no offers.
Thanks.
3124231243312443124531246
Purchased directly from Tormach in the US and imported new to the UK in 2017, light hobby use only in heated/insulated garage. Machine is in good condition and comes with everything required to make parts including optional power draw bar for easy tool changes, Tormach PathPilot controller (including touch screen monitor,) FogBuster coolant system, Saunders Machine Works tooling plate, Metric Haimer 3d Sensor and lots of TTS tooling (including SuperFly, Tension/Compression Tapping head, extensive ER collets and more), Tormach TTS height gauge, lifting kit, full spares kit, etc. I am only selling as I haven't used the Tormach since upgrading to a Datron Neo so I'd rather it found a new home. This is an ideal first machine to get started with CNC machining at home, and is capable of light production in a variety of materials including aluminium, steel, titanium etc.
The milling machine is mounted on the official Tormach base, and a DIY enclosure (constructed from Rexroth 30mm aluminium extrusion, polycarbonate sheet and plywood panels) is included.
The PCNC 770 Series 3 runs on 110V internally; 230V transformer included.
Local collection only although I can assist with loading onto a suitable vehicle.
Please get in touch if you'd like more photos, or a video walk-around/demonstration.
£8000 no offers.
Thanks.
3124231243312443124531246