BZT PF1410 user looking to replace it by a better machine (JazzCNC maybe ?)

[Maikol]

Hello everybody !

My name is Michael, I'm a recording/mixing engineer and a part time woodworker producing bespoke specialized recording/mixing studio furniture for my fellow sound engineers colleagues.

Until now I've used a BZT PF1410 extruded aluminium CNC to cut some parts for the furniture I build, but I've come to the conclusion that it is a really too light and imprecise machine for my needs.

I thus want to replace it by a more robust and powerful machine, and a custom vertical machine from JazzCNC might be what I need.

So here I am, registering here after having been a long time lurker not having enough to say to register. :joyous:

JazzCNC : I've actually already sent you an email, but having had no answer after a few weeks, I wonder if the email wasn't intercepted by some zealous anti-spam filter ?

Cheers everyone and thanks to this great forum to exist !

Michael

[Maikol]

Hi again,

Was just wondering what the rules were regarding being a newcomer and PM sending ability ? I guess there must be some sort of limitation a first, as I'd like to send JazzCNC a PM but cannot find a way to do so ?

Thanks !
Michael

[m_c]

I emailed Dean before Christmas and still have not had a response, so I suspect he's just busy.

Probably best to try giving him a call, and for maximum attention, tell him how good* PG Tips tea is :victorious:

As for PM,s IIRC you have to reach 10 posts on the forum, or the admin might activate it before then if they're feeling generous.



*In case you're not aware, he's a Yorkshire man, and they have a naturally ingrained hatred of anything other than Yorkshire tea

[Clive S]

Hi again,

Was just wondering what the rules were regarding being a newcomer and PM sending ability ? I guess there must be some sort of limitation a first, as I'd like to send JazzCNC a PM but cannot find a way to do so ?

Thanks !
Michael
This is his email [email protected]

[Maikol]

Hey thanks m_c and Clive !

Yes I did send him an email some time ago at the address Clive mentions, but I guess he's just very busy.

Should give him a call, no forgetting the mentions you recommended m_c ! :highly_amused:

Cheers,
M

[Clive S]

Hey thanks m_c and Clive !

Yes I did send him an email some time ago at the address Clive mentions, but I guess he's just very busy.

Should give him a call, no forgetting the mentions you recommended m_c ! :highly_amused:

Cheers,
M

I have sent him a screen shot . He will contact you

[Maikol]

Thank you so much Clive !