3 Axis CNC Router for Sale - Steel Framed, Machines wood/plastic/metals

[raj221]

Hi all,

As I'm busy with work and no longer have the time or space to run this machine, i'm looking to sell. Would alo consider selling parts seperate (control panel as a single unit), if there's more interest. Details as follows:

General Info:
Hours of use: Few hundered hours of hobby use (many of which were idle)
Materials cut: Aluminium, brass, various woods, foams, plastics and more.
Cutting area: ~700 x 400mm with Z axis of around 90mm (from spoil board (18mm thick) to spindle). There is also a 100mm overhang for taller objects at the front, so total ~800mm X axis.

Machine construction:
Components:
- HIWIN 20mm rails on all axis (1000, 600, 300mm)
- 1610 dual ball screws on X axis (1050mm long), 1605 single ball screws on Y/Z (650, 250mm)
- All ball screws are belt driven

Materials:
- 4mm thick steel box section for the frame/gantry
- 10mm steel gantry side plates
- CNC machined aluminium Z axis and motor mounts
- West System epoxy levelled rail base on X axis.

Electrics:
- 2.2kW Water cooled spindle + Huanyang VFD
- AM882 digital drives on all axis
- CSMIO/IP-M motion controller
- PSU for drives + axillary PSU for others
- 8.7Nm NEMA 34 on X axis and 3.1Nm NEMA 23's on Y/Z (all CNC4YOU)
- Shielded cables used throughout

Additional:
- Mach3 license and setup files to suit this machine (can consider selling laptop too)
- Manual valve controlled air blast setup for metal machining
- 25L coolant system setup for spindle
- Proximity sensors on each end of all axis for homing and limits
- Various E-stops on the machine/control box

Can also sell
- Various size aluminium plates
- Various tools/collets for the machine
- Workshop tools (Drill press, bench grinder/sander, compressor, vibratory tumbler, ultrasonic cleaner, etc)

Photos:
Machine:
31631316323163331634316353163631637


Some machined parts:
316393163831640316423164131643


Located in North East for collection, if anyones interested. Thanks

[Wylie]

Hi,
How much are you wanting?

[raj221]

Hi,
How much are you wanting?

Hi, trying to send you a private message but doesnt seem to be working. Will see if I can get it sorted.

[raj221]

Hi,
How much are you wanting?

Looks like it's your settings.
Could you please check and send me a private message when able. Thanks.

[rixarena]

Hi also interested in price thanks Sam

[johnpaulcarter]

Hi, I’m also interested in the price, thank you.

[raj221]

Hi, I’m also interested in the price, thank you.

Hi John, please could you private message me to discuss. Thanks

[raj221]

This is still available.
Looking for around £3,500 for the CNC, collection only — open to offers and would consider selling parts seperatly too (full electrics, frame/gantry, etc).

[raj221]

Edit: Managed to sort storage for this, so availability is now TBC.

[AndyUK]

Hi all,
This is now available as could really do with the extra space.
Cost me quite a bit more for the components alone, so think it's a fair price. Thanks

Bargain price. Hope you get a sale sorted soon.

[raj221]

Still available if anyones interested.

[raj221]

Looking for a quick sale, as planning on moving home — price reduced to £2,000.

Please let me know if anyone's interested.

[raj221]

Still available, now £1,500.

Can sell parts seperatly if there's more interest.

[AndyGuid]

If I was in the UK, I would grab this quickly Raj, but sadly shipping it down under would be prohibitive.

[AndyUK]

Still available, now £1,500.

Can sell parts seperatly if there's more interest.

PM Sent

[raj221]

Now sold. Thanks