Hi hi

[drchabbit]

New to cnc and just got a connect 121 that I want to convert to mach 4 and use for threading

what are the best motion control and stepper drive to get to do this please


cheers Tony


cialis super active prix (https://service-pharmaceutique.com/cialissuperactive)

[JohnHaine]

I don't know about "best" but my Super 7 conversion uses UC100 motion controller with USB connection to mini PC running Win10. A fairly generic BoB and 2M542 (or better DM542) drivers running on 40v. Unless you are going to fit new steppers or stepper/servos this would be fine I think. I can't recall if Mach4 uses just a spindle index pulse for threading or can take an encoder pulse too - I suspect the UC100 may not handle an encoder. But Mach3 threads OK with just an index.

Btw the Conect 121 is based on the Myford ML10.