Len-Tikular
17-03-2023, 03:45 PM
I have a Rattm 2.2 KW 220vac 3Phase 400Hz 6Amp Asynchronous spindle motor.
I want to use my Mitsubishi FR-D720S-100SC-E8 VFD
I have already destroyed my 10 year old Spindle motor and Inverter (I don't know why) ??
I'm in fear of destroying my new setup, I have the full documentation for the VFD but I'm getting very confused.
Here's what I have so far. I don't want to blowup my new arrangement so it would be great if anyone give me the correct settings for my setup,
P0=4
P1= 400hz
P2=120hz
P3=400hz What does Base frequency mean.
P4=400Hz
P5=200HZ
P6=100Hz
P7=5
P8=5
P9=5
P15=5
P18=400
P19=8888
P24=9999
P55=50
P56=10amp
P71=0 ?? Applied motor type.
P84=120Hz ??? I cannot set higher than 120Hz. I thought this should be 400HZ
P161= Confused.
Please help.
Many thanks
George
Mr Moderator, if if this post is duplicated or in the wrong area then I apologies.
I want to use my Mitsubishi FR-D720S-100SC-E8 VFD
I have already destroyed my 10 year old Spindle motor and Inverter (I don't know why) ??
I'm in fear of destroying my new setup, I have the full documentation for the VFD but I'm getting very confused.
Here's what I have so far. I don't want to blowup my new arrangement so it would be great if anyone give me the correct settings for my setup,
P0=4
P1= 400hz
P2=120hz
P3=400hz What does Base frequency mean.
P4=400Hz
P5=200HZ
P6=100Hz
P7=5
P8=5
P9=5
P15=5
P18=400
P19=8888
P24=9999
P55=50
P56=10amp
P71=0 ?? Applied motor type.
P84=120Hz ??? I cannot set higher than 120Hz. I thought this should be 400HZ
P161= Confused.
Please help.
Many thanks
George
Mr Moderator, if if this post is duplicated or in the wrong area then I apologies.