JOGARA
04-05-2023, 07:02 PM
Hi all
Looking at building my own PCB pin-cutting machine. They look pretty simple so I don't fancy paying £4000 for something I could build for under £1000.
Here is a video of what they do
https://youtu.be/CpGo-83pY50
This is the machine
31873
It uses what looks to be a custom-design cutting tool to remove the leads from through-hole components.
31874
31875
I have seen a few designs for the handheld pendant.
31876
31877
Does anyone know what they are?
I suspect they are one of those generic controllers such as a DM500 (https://s.click.aliexpress.com/e/_DmhUSuZ) but with custom firmware.
Here is the manual from one of the manufacturers.
https://drive.google.com/drive/folders/12XGmuEJ2_dIrbdufjC42flV4QRAW_dNb
You basically tell it to go to certain XY cords, tell it how many PCBs you have in the panel, tell it where the panels are and then it will run the job.
Can also import position data.
Looking at building my own PCB pin-cutting machine. They look pretty simple so I don't fancy paying £4000 for something I could build for under £1000.
Here is a video of what they do
https://youtu.be/CpGo-83pY50
This is the machine
31873
It uses what looks to be a custom-design cutting tool to remove the leads from through-hole components.
31874
31875
I have seen a few designs for the handheld pendant.
31876
31877
Does anyone know what they are?
I suspect they are one of those generic controllers such as a DM500 (https://s.click.aliexpress.com/e/_DmhUSuZ) but with custom firmware.
Here is the manual from one of the manufacturers.
https://drive.google.com/drive/folders/12XGmuEJ2_dIrbdufjC42flV4QRAW_dNb
You basically tell it to go to certain XY cords, tell it how many PCBs you have in the panel, tell it where the panels are and then it will run the job.
Can also import position data.