CJ-Merlin
11-08-2023, 05:02 PM
A reluctant sale, Boxford TCL160 converted to operate with Mach 3 with an 8 tool autochanger
and foldaway manual tailstock.
The front panel buttons and feed control to operate the machine have been integrated into a
Mach3 environment using modbus and Mach3 brains so the machine works as it did originally.
A very clean well looked after machine (a couple of small cracks in the perspex cover) with
computer tower (and monitor) loaded with an unlicenced copy of Mach3 all configured to run
the machine. (no mouse or keyboard)
The toolchanger is loaded with a standard turning tool, a boring bar, inside and outside
threading tools, pilot drill and some grooving tools.
There are also a few turning tools spare with a chuck key.
Located in Devon, pickup only. Can be seen working.
£3000
and foldaway manual tailstock.
The front panel buttons and feed control to operate the machine have been integrated into a
Mach3 environment using modbus and Mach3 brains so the machine works as it did originally.
A very clean well looked after machine (a couple of small cracks in the perspex cover) with
computer tower (and monitor) loaded with an unlicenced copy of Mach3 all configured to run
the machine. (no mouse or keyboard)
The toolchanger is loaded with a standard turning tool, a boring bar, inside and outside
threading tools, pilot drill and some grooving tools.
There are also a few turning tools spare with a chuck key.
Located in Devon, pickup only. Can be seen working.
£3000