Deck36
23-01-2024, 06:08 PM
Hi All
I'm an industrial modelmaker and I bought a Mach3 converted Novamill during lockdown.
Only recently got it running and making nice parts, to find the Windows XP PC that ran it dead one evening, with a non recognisable HDD.
I hadn't had time (or even thought) to backup the config file, so now I have a UC100 hooked up to a W10 laptop and no real idea of where to start with pins/ports.
I could really use some help, if anyone has any details or lists of settings?
Lots of great information in this group.
Thanks
I'm an industrial modelmaker and I bought a Mach3 converted Novamill during lockdown.
Only recently got it running and making nice parts, to find the Windows XP PC that ran it dead one evening, with a non recognisable HDD.
I hadn't had time (or even thought) to backup the config file, so now I have a UC100 hooked up to a W10 laptop and no real idea of where to start with pins/ports.
I could really use some help, if anyone has any details or lists of settings?
Lots of great information in this group.
Thanks