PDA

View Full Version : NEW MEMBER: Denford Triac converted to UCCNC



Jonesdp
11-04-2024, 08:47 AM
Hi All,

Looking for some assistance to set up my Triac that I have had retro-fitted with UCCNC software.
Any assistance would be much appreciated .

Thanks

Paul

Ahmad T
11-04-2024, 04:34 PM
Welcome to the forum.

JohnHaine
12-04-2024, 09:49 PM
https://www.forum.cncdrive.com/

Maybe more likely to find help here.

JohnHaine
13-04-2024, 09:24 AM
...or there!

Chaz
13-04-2024, 09:46 AM
Hi All,

Looking for some assistance to set up my Triac that I have had retro-fitted with UCCNC software.
Any assistance would be much appreciated .

Thanks

Paul

What are you struggling with?

Jonesdp
27-08-2024, 03:53 PM
Hi Chaz,

When I home the machine the Z axis screen counts up and down but the motor does not turn.

Thanks

Paul

Chaz
27-08-2024, 10:47 PM
Hi Chaz,

When I home the machine the Z axis screen counts up and down but the motor does not turn.

Thanks

Paul

And does the Z work normally when using jog or mpg?