Crazy L
25-08-2024, 02:39 PM
Hi all.
Selling up, it isn't for me. My Denford micromill has serial port lead, keyboard, monitor, mouse, hard drive and a serial port card. ER16 collets and a few carbides. Hard drive has Mach 3 installed.
Long story short (long versions are on this forum) Bought working machine with mach 3, machined some bits, hard drive died, got another PC, reinstalled mach 3 (from Newfangled Solutions), got part way through setting parameters, Motherboard died. Completely lost interest. This is over the course of several years, such is my enthusiasm.
Also comes with an orange bucket filled with ali offcuts. Leads coming through in to cabinet (pictured), are for a 4th Axis (never used)
£550, take it away.
32362
32363
32364
32365
32366
32364
32367
32368
32364
Collection from Havant, near Portsmouth.
Thanks for looking
Selling up, it isn't for me. My Denford micromill has serial port lead, keyboard, monitor, mouse, hard drive and a serial port card. ER16 collets and a few carbides. Hard drive has Mach 3 installed.
Long story short (long versions are on this forum) Bought working machine with mach 3, machined some bits, hard drive died, got another PC, reinstalled mach 3 (from Newfangled Solutions), got part way through setting parameters, Motherboard died. Completely lost interest. This is over the course of several years, such is my enthusiasm.
Also comes with an orange bucket filled with ali offcuts. Leads coming through in to cabinet (pictured), are for a 4th Axis (never used)
£550, take it away.
32362
32363
32364
32365
32366
32364
32367
32368
32364
Collection from Havant, near Portsmouth.
Thanks for looking