Matt Baker
17-09-2024, 02:01 PM
hello you beautiful people, cnc noob here
i am the proud owner of a genmitsu 6050 - had a little fiddle with it and now im trying to do my first 3d carve
im using carveco maker, have genmitsu's own 1.25 router, a selection of branded bits
basically im running simulation and im getting 40+ hour carve times in a 200x200mm bit of pine
when i fiddle with the parameters - it either takes longer or the 3d model looks like someones eaten the wood into shape
im at that point where my brain hurts because i can't figure it out.
is there anyone here who can help me please =)
your time is hugely appreciated, thank you for reading =)
matt
i am the proud owner of a genmitsu 6050 - had a little fiddle with it and now im trying to do my first 3d carve
im using carveco maker, have genmitsu's own 1.25 router, a selection of branded bits
basically im running simulation and im getting 40+ hour carve times in a 200x200mm bit of pine
when i fiddle with the parameters - it either takes longer or the 3d model looks like someones eaten the wood into shape
im at that point where my brain hurts because i can't figure it out.
is there anyone here who can help me please =)
your time is hugely appreciated, thank you for reading =)
matt