PDA

View Full Version : FOR SALE: Geckodrive G251



m_c
03-01-2010, 11:32 PM
Geckodrive G251 (2 off)

Had these lying around gathering dust for some time now, and currently have no plans for them. They're still in the original packaging they came in, and have only ever been taken out to admire just how small they are.

Details from Geckodrives website are-

The G251 is one of Geckodrive's newest low-price, high-quality step motor drives. The G250 is produced using brand new techniques allowing it to be sold for very low prices in volume while maintaining excellent quality. This is in essence a miniaturized version of the G201 complete with a heatsink plate and 3.5mm 12 position connector.



3.5A 50VDC maximum

Digitally filtered STEP, DIRECTION and DISABLE inputs
3.3V and 5V logic compatible inputs
300 kHz maximum step pulse frequency
Top settable Adjust trimpot
Power LED indicator
No user settable jumpers

20 kHz switching frequency
Mid-band resonance compensated
Microstep to full step morphing at higher speeds
Small size

Four layer PCB

Discrete all N-channel MOSFET full bridge design
14A rated power MOSFETs
3.5mm 12 position connector with screw type terminal
They currently cost $69 each (unless you're buying more than 12), which at the current exchange rate is just over £40 each, before you add shipping/import duty/vat.

Ideally looking for £70-80 for them posted, but am open to offers.

Ridevs
18-01-2022, 07:07 PM
Geckodrive G251 (2 off)

Had these lying around gathering dust for some time now, and currently have no plans for them. They're still in the original packaging they came in, and have only ever been taken out to admire just how small they are.

Details from Geckodrives website are-

The G251 is one of Geckodrive's newest low-price, high-quality step motor drives. The G250 is produced using brand new techniques allowing it to be sold for very low prices in volume while maintaining excellent quality. This is in essence a miniaturized version of the G201 complete with a heatsink plate and 3.5mm 12 position connector.



3.5A 50VDC maximum

Digitally filtered STEP, DIRECTION and DISABLE inputs
3.3V and 5V logic compatible inputs
300 kHz maximum step pulse frequency
Top settable Adjust trimpot
Power LED indicator
No user settable jumpers

20 kHz switching frequency
Mid-band resonance compensated
Microstep to full step morphing at higher speeds
Small size

Four layer PCB

Discrete all N-channel MOSFET full bridge design
14A rated power MOSFETs
3.5mm 12 position connector with screw type terminal
They currently cost $69 each (unless you're buying more than 12), which at the current exchange rate is just over £40 each, before you add shipping/import duty/vat.

Ideally looking for £70-80 for them posted, but am open to offers.

£70 offered for both, including post to Cornwall. Still available?