AdCNC
04-01-2010, 02:03 PM
Hi guys clearing out the garage abit and decided to sell some bits n bobs i wont be using.
All the parts you see have only been used for testing and not actually used properly on a machine, so bearings have 0 wear and the rails are straight as a die.
There are
8 x SMA25 Bearings from Zapp
12 x SK25 Supports from Zapp
4 x 1829mm x 25mm ground and hardened rail
2 x 1415mm x 25mm ground and hardened rail
This little lot cost me over £450 new
The Rail can be cut down easily with a grinder/chop saw
open to offers
http://img132.imageshack.us/img132/9752/dsc0010dm.jpg http://img189.imageshack.us/img189/8198/dsc0017lc.jpg
All the parts you see have only been used for testing and not actually used properly on a machine, so bearings have 0 wear and the rails are straight as a die.
There are
8 x SMA25 Bearings from Zapp
12 x SK25 Supports from Zapp
4 x 1829mm x 25mm ground and hardened rail
2 x 1415mm x 25mm ground and hardened rail
This little lot cost me over £450 new
The Rail can be cut down easily with a grinder/chop saw
open to offers
http://img132.imageshack.us/img132/9752/dsc0010dm.jpg http://img189.imageshack.us/img189/8198/dsc0017lc.jpg