2 x Denford Starmills (ATC)

[Sparky]

2 x starmills available £1,950 each.

Both run off a ABAC compressor see attached (£450) 2 x airlines included. 4 outlets.

Windows XP/Mach3/VR milling. Included.

BT35/ER32 tooling x 15 £50 each will be sold with machines only. *5 tool holders free per machine.

Fully operational and working ready to go!

ATC never used as I wanted more tool changes within my programs. I use M00/M24/M25 program break for tool change.

I have Videos of both machines working if anyone wants to see or in person PE30 4.
Program template on each machine. Training if required by negotiation.

It's time to sell all my entire workshop equipment, including but not limited to, Warco GH milling machine with auto X travis feed and DRO, Router 800 mm x 500 mm, Warco Mini Lathe, Warco Saw, milling cutters, drills, Micrometers, off hand grinder, bench drill, many many more items. These will be put up shortly.

Favorable discount for multi-buys and special discount for complete workshop equipment job lot.
Collection preferred, however I could deliver for a fee depending where.

[Muzzer]

Ooof. £750 for 15 toolholders. Let me think about that....

[Sparky]

Fair comment Muzzer on reflection. BT35 toolholder are very difficult to come by in the UK. Advert edited.
Cheers Sparky

[Muzzer]

I know what you mean! My machines use ISO30 and ISO40 tooling. ISO30 is more expensive and difficult to find than ISO40 - and ISO35 is truly a minority sport. You can get decent 30 and 40 tooling for £20 or so from the likes of APT (and Cutwel when they have an offer on) but £50 seems to be the starting price for 35, direct from China.

As you say, best keep the tooling with the machine as neither is much use without the other.