Wobblybootie
06-06-2010, 08:52 AM
Hi Folks,
I have attached a sketch of a Jig I would like knocked together, I can arrange for the required materials to be delivered to you along with payment and return postage.
How it is made and what of, is up to you, although as I will be running a drill through the holes maybe steel rather than aluminium would be a better choice. I also leave up to you the method of attaching the sides to the top plate.
It's use ... to accurately position holes in 45mm Extrusion as (for now at least) I do not have access to a Pillar Drill.
If you can see any glaring errors in the drawing or have a better method of doing it please shout!!
Many Thanks
Tim
I have attached a sketch of a Jig I would like knocked together, I can arrange for the required materials to be delivered to you along with payment and return postage.
How it is made and what of, is up to you, although as I will be running a drill through the holes maybe steel rather than aluminium would be a better choice. I also leave up to you the method of attaching the sides to the top plate.
It's use ... to accurately position holes in 45mm Extrusion as (for now at least) I do not have access to a Pillar Drill.
If you can see any glaring errors in the drawing or have a better method of doing it please shout!!
Many Thanks
Tim