View Full Version : Bargain for someone on eBay
irving2008
13-07-2010, 09:56 PM
Possibly a good starting point, if you don't mind a bit of work...
http://cgi.ebay.co.uk/CNC-TABLE-ROUTER-BORER-MILLING-ETC-KOLLMORGEN-/200491720898
80cm square table, 46 x 40cm working area
Ross77
15-07-2010, 01:30 AM
Cheers Bud. its in the bag £350 :beer::beer::beer:
If its as good as i think then its worth way more than the price I paid. 1.5 m linear rails and 0.9m rails. " x2 3 phase servo motors with 2048ppr encoders and drives! ballscrews look like 20mm lead but should be ok withthe servos
Happy days..:yahoo:
Ross77
17-07-2010, 09:48 PM
Thanks again Irving
Picked it up today and it's better than I'd hoped
2x 1250mm long 25mm NB linear rail with 3 carrages per rail
2x 820mm long 15mm NB linear rail with 3 carrages per rail
2x 16mm dia. 16mm lead NSK C5 ballscrews 580mm of travel and all mounts
2x Kollmorgen AC servomotors and drives
Just need to work out how to connect the AC servos to a PC and mach3 without killing myself.........
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.