routercnc
25-07-2010, 07:58 PM
Before offering them on Ebay, I thought I'd post these bits here. Due to a new machine, these are now surplus to requirements and are up for sale.
Parts are:
25mm diameter, chromed hardened linear rail, approx 1210mm long, 2off
25mm diameter, chromed hardened linear rail, approx 790mm long, 2off
20mm diameter, chromed hardened linear rail, approx 404mm long, 2off
25mm linear bearings in pillow mounting blocks to suit 25mm rail, 8off
20mm linear bearings to suit 20mm rail, 4off
25mm rail clamp flange mounts, 4off
For sale as a set, making a good starter set for a CNC machine. Rails can be cut with thin metal cutting discs and a grinder.
All parts have had light use, machining balsa and lightply, so are almost new. Slight marks here and there, but nothing to effect operation which is smooth and light.
I've added all this up and it was about £450 new, mostly from Marchant Dice except clamps which were from motioncontrolproducts.
Looking for about £260. Due to weight and size, offered as pick up only. Coventry based. Thanks for looking.
Parts are:
25mm diameter, chromed hardened linear rail, approx 1210mm long, 2off
25mm diameter, chromed hardened linear rail, approx 790mm long, 2off
20mm diameter, chromed hardened linear rail, approx 404mm long, 2off
25mm linear bearings in pillow mounting blocks to suit 25mm rail, 8off
20mm linear bearings to suit 20mm rail, 4off
25mm rail clamp flange mounts, 4off
For sale as a set, making a good starter set for a CNC machine. Rails can be cut with thin metal cutting discs and a grinder.
All parts have had light use, machining balsa and lightply, so are almost new. Slight marks here and there, but nothing to effect operation which is smooth and light.
I've added all this up and it was about £450 new, mostly from Marchant Dice except clamps which were from motioncontrolproducts.
Looking for about £260. Due to weight and size, offered as pick up only. Coventry based. Thanks for looking.