View Full Version : 500w PSU
MickG
17-09-2010, 10:02 PM
I have the 500w Telecom PSU ( same as the E-Bay one). very much a newbie and need to know which pins to use to connect to a PM 752 Driver Board
Thanks
Mick
irving2008
17-09-2010, 10:45 PM
Here is the pinout. The pins you need are:
12 and/or 14 to the +V rail on the driver P2 connector
20 and/or 22 to the GND connection on the driver P2 connector
hope that helps
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.