PDA

View Full Version : My CNC converted Harrison M250



M250cnc
18-11-2010, 11:12 AM
http://www.mycncuk.com/forums/media.php?do=details&mid=50

Not a step by step build but the machine in action and some of what i did to it.

Phil

FatFreddie
18-11-2010, 11:26 AM
Hi Phil,

The lathe is looking good :-)

Where did you get the telescopic screw covers from?

Mark

M250cnc
18-11-2010, 11:38 AM
Hi Phil,

The lathe is looking good :-)

Where did you get the telescopic screw covers from?

Mark

Hi Mark thanks for your comments. http://www.dqr.co.uk/ballscrew_covers.html they cost about 100 and take 4-6 weeks for delivery

Phil

Muzzer
13-01-2022, 06:45 PM
It's a year ago now but any idea where this linked thread went? It seems to have disappeared....

m_c
13-01-2022, 11:58 PM
A year ago?
12 years ago!

Original media still exists, just the link has been changed, probably due to a forum update.
Current link is http://www.mycncuk.com/media.php?do=details&mid=50

Muzzer
14-01-2022, 03:46 PM
Ah, but what's a decade between friends!

Thanks for spotting that. Nice, businesslike conversion there.

My Bantam looks like a baby version of the M250 in many ways. In my case I mounted the X axis motor at the back of the saddle and fitted linear encoders so I could close the position control in LinuxCNC.

I got my telescopic ballscrew covers from AliExpress but I haven't fitted them yet. Obviously, the minute I do I will need to remove them again and they are the very devil to get off without dismantling the entire front assembly.

Muzzer
14-01-2022, 09:20 PM
duplicate