View Full Version : Digitizing

Mad Professor
05-01-2011, 05:31 PM
Good day all.

I am wanting to start learning how to do Digitizing?

I have a few things that I want to try digitizing.

To start with I was thinking piston crown, and flywheel.

But I don't know where to start.

I don't have a multiaxis probe, so I will be doing it the cheap way, grounding the item, and using a 1mm tool connected to the probe port.

So I would like you help and advice, on how to get started.

Thanks for your time.

Best Regards.

06-01-2011, 01:49 AM
Only thing relating to digitizing I've ever stumbled across, is the video digitizing board on the mach forums - http://www.machsupport.com/forum/index.php?board=67.0

06-01-2011, 06:52 PM
I havent tried any scanning myself but i have heard that the probe method can run into hours scanning relatively small parts then you need point cloud compatible software to make sense of the file.

Maybe have a look here http://www.david-laserscanner.com/ (http://www.david-laserscanner.com/)