neurofen
04-02-2011, 10:13 AM
hi,
I have a couple of bits i need machining, give me an email , pm, whichever if you can.
atatched a jpeg... hope you can see the drawings properly
tolerance on the hole positioning needs to be idealy +/- 0.01mm, Outside cuts +/- 0.1mm
london based. can supply rhino or 3ds files. on a bit of a budget after a seriously bad couple of months...
thanks
rich
I have a couple of bits i need machining, give me an email , pm, whichever if you can.
atatched a jpeg... hope you can see the drawings properly
tolerance on the hole positioning needs to be idealy +/- 0.01mm, Outside cuts +/- 0.1mm
london based. can supply rhino or 3ds files. on a bit of a budget after a seriously bad couple of months...
thanks
rich