PDA

View Full Version : Has Anybody used one of these G540 4-axis system



HS93
05-03-2011, 03:29 AM
Has anyboby used one of these I want to use it for my Mini WidgitMaster using 180Ncm drives will it be ok or is there a better alternative

http://www.geckodrive.com/g540-p-39.html?osCsid=447526608b680f39a78d932687ec9720

Thanks and sorry if this has been coverd but could not find it

Peter

m_c
05-03-2011, 09:23 PM
In terms of finding actual users, the machsupport forums, and cnczone will be your best bet.

Personally, I like geckodrives, but they can get a bit expensive trying to get them on this side of the pond.
There is now an official UK distributor, but it's almost as cheap buying direct from Geckodrive, or from any of the other foreign distributors. Especially if you need to buy stuff from one of the other suppliers anyway.

HS93
05-03-2011, 11:11 PM
I had a look on the

http://www.charter-controls.com/
website and they are on offer at the moment so I may go for it as it is one package. just plug in

Peter