Jimmybristol
30-05-2011, 01:52 PM
I have the following that I am open to any offers on.... Maybe a 4th axis??
4079
The Brushless motor is as follows:
With the following Maxon Parts:
Motor EC45 136209
https://downloads.maxonmotor.com/Katalog_neu/eshop/Downloads/Katalog_PDF/maxon_ec_motor/EC-programm/new/newpdf_11/EC-45-136210_11_EN_157.pdf
Gearbox GP42 26:1
Encoder HEDL 9140 (500ppr - don't forget edge multiplication in the controller)
EPOS 70/10 position controller (This can be set up to do step and direction, with a RS232 Tuning interface etc)
Maxon shunt regulator (235811) - Protects the power supply from over voltage when Rapid moving.
As I say open to offers.... Any questions please ask
James
4079
The Brushless motor is as follows:
With the following Maxon Parts:
Motor EC45 136209
https://downloads.maxonmotor.com/Katalog_neu/eshop/Downloads/Katalog_PDF/maxon_ec_motor/EC-programm/new/newpdf_11/EC-45-136210_11_EN_157.pdf
Gearbox GP42 26:1
Encoder HEDL 9140 (500ppr - don't forget edge multiplication in the controller)
EPOS 70/10 position controller (This can be set up to do step and direction, with a RS232 Tuning interface etc)
Maxon shunt regulator (235811) - Protects the power supply from over voltage when Rapid moving.
As I say open to offers.... Any questions please ask
James