andrewbond
22-08-2011, 03:10 PM
Hi Guys,
I need to sell my diy cnc to free up the cash I have spent asap!
I'ts an 8x4 with 300mm of z travel.
Heres a description of what it is/you get.
Bosch-Rexroth T-slot frame 90x90 profile.
Ballscrew Y & Z
Rack & Pinion X-axis (cncrouterparts belt reduction assembly)
Sealed MDF Bed.
Uniport BOB
4 Leadshine PM542 Drivers
PSU
I copy of mach 3
PC to run it all.
Chinese 2.2kw Spindle with watercooling system & mounting brackets (not yet fitted)
...
Problems..
Currently there is a glitch on the x-axis losing steps.
The Y has a bit of flex that could do with addressing.
In truth this is a part complete project that will give the foundation for a good machine.
I've included some pictures..
I'm looking for about £4200..but am open to offers if you don't want the controls or spindle.
Thanks for looking, I'm looking to get this sold quickly..
Hopefully I will be able to restart my cnc career when my finances are a little better.
Thanks For Looking!
Andrew
4370
I need to sell my diy cnc to free up the cash I have spent asap!
I'ts an 8x4 with 300mm of z travel.
Heres a description of what it is/you get.
Bosch-Rexroth T-slot frame 90x90 profile.
Ballscrew Y & Z
Rack & Pinion X-axis (cncrouterparts belt reduction assembly)
Sealed MDF Bed.
Uniport BOB
4 Leadshine PM542 Drivers
PSU
I copy of mach 3
PC to run it all.
Chinese 2.2kw Spindle with watercooling system & mounting brackets (not yet fitted)
...
Problems..
Currently there is a glitch on the x-axis losing steps.
The Y has a bit of flex that could do with addressing.
In truth this is a part complete project that will give the foundation for a good machine.
I've included some pictures..
I'm looking for about £4200..but am open to offers if you don't want the controls or spindle.
Thanks for looking, I'm looking to get this sold quickly..
Hopefully I will be able to restart my cnc career when my finances are a little better.
Thanks For Looking!
Andrew
4370