bigmatt-s2rst
02-10-2011, 10:13 PM
hi all, ive just registered to the forum
i do a little machining with work but nothing huge
recently a bought a job lot off tools, i knew what a lot of it was but im having trouble with a final bit
i think its a quick release collet tapping set up but im not entirely sure
http://img.photobucket.com/albums/0703/bigmatt-s2rst/IMG_0219.jpg
the markings are as follows:
large main part/chuck
bison s3
mt4-c
m14-m33
the 3 collet sets
m22 16x12.5
m24 18x14.5
m27 20x16
ive googled it to to death but drawn a blank
thank you in advance and i hope someone can shed some light
i do a little machining with work but nothing huge
recently a bought a job lot off tools, i knew what a lot of it was but im having trouble with a final bit
i think its a quick release collet tapping set up but im not entirely sure
http://img.photobucket.com/albums/0703/bigmatt-s2rst/IMG_0219.jpg
the markings are as follows:
large main part/chuck
bison s3
mt4-c
m14-m33
the 3 collet sets
m22 16x12.5
m24 18x14.5
m27 20x16
ive googled it to to death but drawn a blank
thank you in advance and i hope someone can shed some light