Shinobiwan
01-03-2012, 07:47 PM
As title really for an X axis upgrade.
These are the mounts in question:
http://www.zappautomation.co.uk/fk20c7-ball-screw-support-p-462.html?cPath=11_136
And I need 80x40 profile machining to fit these including 4x tapped holes per mount. There's a total of 2x FK on one section of 1.2m long 80x40 and 2x FF on the another.
I don't have the equipment or know how to pull this off with confidence. Would be great if I could find someone local as I could drop the parts off with you. Will pay for your time.
Thanks
Ant
These are the mounts in question:
http://www.zappautomation.co.uk/fk20c7-ball-screw-support-p-462.html?cPath=11_136
And I need 80x40 profile machining to fit these including 4x tapped holes per mount. There's a total of 2x FK on one section of 1.2m long 80x40 and 2x FF on the another.
I don't have the equipment or know how to pull this off with confidence. Would be great if I could find someone local as I could drop the parts off with you. Will pay for your time.
Thanks
Ant