dsc
16-06-2012, 01:24 PM
Gents,
I'm currently working on a small machine and need to manufacture the following cutout panel to hold three switches:
http://i1120.photobucket.com/albums/l496/dsc_MT/gaggia%20classic/classic_plate.png
Material: Stainless steel, 1mm thick
Quantity: 1 + 1 (it's two parts, so I need a single pair)
Can anyone provide a quote? It's for a home project so I wouldn't want to spend a fortune. Depending on the costs I might want to produce an aluminium prototype first to see if everything fits properly.
Regards,
Tom
I'm currently working on a small machine and need to manufacture the following cutout panel to hold three switches:
http://i1120.photobucket.com/albums/l496/dsc_MT/gaggia%20classic/classic_plate.png
Material: Stainless steel, 1mm thick
Quantity: 1 + 1 (it's two parts, so I need a single pair)
Can anyone provide a quote? It's for a home project so I wouldn't want to spend a fortune. Depending on the costs I might want to produce an aluminium prototype first to see if everything fits properly.
Regards,
Tom