riche543
20-06-2012, 03:07 AM
Hi all
Just finished building new engraving head .
So z axis will float & has a depth adjustment nose
Works fantastic
http://www.cnczone.com/forums/attachment.php?attachmentid=161719&d=1339914668
http://www.cnczone.com/forums/attachment.php?attachmentid=161720&d=1339914707
http://www.cnczone.com/forums/attachment.php?attachmentid=161721&d=1339914734
Will cut linear rods a bit shorter
http://www.cnczone.com/forums/attachment.php?attachmentid=161722&d=1339914798
I use compressed air too blow chips while cutting so I incorporated it into engraving head too keep nose clean,(small hole left of nose)
http://www.cnczone.com/forums/attachment.php?attachmentid=161723&d=1339914834
http://img.tapatalk.com/dcf54f08-b973-0440.jpg
Very happy with results , no more nice depth one end too deep or miss the other.
http://www.cnczone.com/forums/attachment.php?attachmentid=161724&d=1339914980
Cheers
Riche
Sent from my iPhone using Tapatalk Cheers!
Sent from my iPhone using Tapatalk
Just finished building new engraving head .
So z axis will float & has a depth adjustment nose
Works fantastic
http://www.cnczone.com/forums/attachment.php?attachmentid=161719&d=1339914668
http://www.cnczone.com/forums/attachment.php?attachmentid=161720&d=1339914707
http://www.cnczone.com/forums/attachment.php?attachmentid=161721&d=1339914734
Will cut linear rods a bit shorter
http://www.cnczone.com/forums/attachment.php?attachmentid=161722&d=1339914798
I use compressed air too blow chips while cutting so I incorporated it into engraving head too keep nose clean,(small hole left of nose)
http://www.cnczone.com/forums/attachment.php?attachmentid=161723&d=1339914834
http://img.tapatalk.com/dcf54f08-b973-0440.jpg
Very happy with results , no more nice depth one end too deep or miss the other.
http://www.cnczone.com/forums/attachment.php?attachmentid=161724&d=1339914980
Cheers
Riche
Sent from my iPhone using Tapatalk Cheers!
Sent from my iPhone using Tapatalk