Left overs and bits for sale.

[Shinobiwan]

Random bunch of bits left over from upgrading. All of the stuff is as new since the machine never cut anything prior to the upgrade.

Looking to shift the lot in one so its priced to sell at £70 + postage.

1.8m e chain (internal dimensions 20x10mm)
4x Unsupported rail mounts (not sure on the size but can measure)
Dual voltage PSU 5v 1A and 12v 1A intended for powering breakout boards, relays etc.
Transformer 240v to 24v (DIN Rail Mount)
Panel Mounted E-Stop button
Dust proof on/off control box
36v 11A (400w) PSU with voltage adjust pot for approx 36 +/-4v adjustment range
48v 7.8A (350w) PSU with voltage adjust pot for approx 48 +/-5v adjustment range
60v 8.3A(500w) PSU with voltage adjust pot for approx 60 +/-5v adjustment range

Your welcome to collect from Chesterfield, Derbyshire. Have paypal too if needed. Also have ebay account with 950+ positive feedback in case my low post count is off putting. JazzCNC might vouch for me too if he's in good mood.

[Shinobiwan]

Also have a selection of 3 and 4 core CY shielded cable that I need to sort through if anyone is interested.

[Jonathan]

Would you be prepared to split this lot? If so how much do you want for panel e-stop, e-chain and the 60V PSU? I may also be interested in the 48V PSU.

PM or reply here, I don't mind...thanks.

[Shinobiwan]

Fancied an easy life with one trip to the post office :)

I guess £30 for those plus whatever the postage works out at.

[Jonathan]

Certainly interested, will PM you shortly.

[John S]

I'll take the lot and collect, save pissing about.
Pay cash as well.

[Mad Professor]

Well it looks like I missed out on some deals again, Doh!

[Shinobiwan]

I would prefer these go as one lot and since John has offered that and is collecting that's win win for me.

I'll PM you John to arrange the details.

Thanks for the interest and sorry I'm a lazy sod and didn't want to split!

[JAZZCNC]

John S your a Jammy old bugger getting all that stuff for £30 and him throwing in them drives n bag stuff in free.!! . . . . Bet you got a cuppa tea and some HobNobs as well dint ya. .:pirate:.!!

[John S]

Yup, well worth the trip up there. Certainly got more than i expected, cheers Ant.

[Shinobiwan]

No problem John, anytime!

[Mad Professor]

John S: Would you be willing to resell the 60v (500w) Power Supply? I am still using the eBay ex BT PSU at 42 volts on my 752 drivers & 3nm motors.

[John S]

No sorry, bought it for a conversion I am doing.

[Mad Professor]

Oh well, it was worth asking.