Normsthename
08-07-2012, 10:46 PM
For Sale
My Home built CNC Plasma / Router Cutter - everything you need to cut wood or metal!
Here is a video of it cutting 1.5mm Stainless Steel
http://www.youtube.com/watch?v=Cn1Sgeo6jas&feature=youtube_gdata_player
This CNC Plasma Cutter can be converted from a Plasma cutter into a CNC Wood Router in approx. an hour and vice versa.
6288
This is a picture showing the Wood Router option fitted.
I built this machine a couple of years ago for my business.
Unfortunately I have had to close the business down so the machine is now surplus to my requirements.
It comes complete with the following :-
3 Axis CNC Table
3 Phase Hypertherm Powermax 1000 Plasma Cutter with Machine Torch.
(This will cut upto 12.7mm thick material)
Campbell THC300 Torch Height Controller.
(This constantly adjusts the torch height to ensure the best cut possible)
Kress 240v Wood Router (This is brand new, only been used for less than an hour!)
Wood Router Table Cutting Limits 900mm x 600mm x 140mm Approx.
Plasma Table Cutting Limits 985mm x 600mm Approx.
Plasma table has a homebuilt Water Table to keep the plasma dust down.
Computer Base unit with Mach3 CNC Controller Software installed, this is a basic computer but is perfectly adequate for running the Mach3 Software.
I will also supply the following software that I purchased :-
Sheetcam CNC Programming Software (Generates the Gcode for Plasma Cutting)
Vcarve 5.5 (Wood Router Software, costs £££ to buy)
Cut3D (Wood Router software to machine 3D objects)
Photocarve (Wood Router software to Vcarve photographs)
Machine will need to be collected by the buyer at there expense.
You will need a Transit / Luton van to collect the machine.
Machine can be viewed working and I will give the buyer a couple of hours tuition to get them up to speed before they take delivery.
Price £3500 ono
I will be willing to sell the machine without the Hypertherm Plasma if you do not have 3 phase electrics.
Price minus hypertherm Plasma Cutter £2300 ono
Thanks
Andy
My Home built CNC Plasma / Router Cutter - everything you need to cut wood or metal!
Here is a video of it cutting 1.5mm Stainless Steel
http://www.youtube.com/watch?v=Cn1Sgeo6jas&feature=youtube_gdata_player
This CNC Plasma Cutter can be converted from a Plasma cutter into a CNC Wood Router in approx. an hour and vice versa.
6288
This is a picture showing the Wood Router option fitted.
I built this machine a couple of years ago for my business.
Unfortunately I have had to close the business down so the machine is now surplus to my requirements.
It comes complete with the following :-
3 Axis CNC Table
3 Phase Hypertherm Powermax 1000 Plasma Cutter with Machine Torch.
(This will cut upto 12.7mm thick material)
Campbell THC300 Torch Height Controller.
(This constantly adjusts the torch height to ensure the best cut possible)
Kress 240v Wood Router (This is brand new, only been used for less than an hour!)
Wood Router Table Cutting Limits 900mm x 600mm x 140mm Approx.
Plasma Table Cutting Limits 985mm x 600mm Approx.
Plasma table has a homebuilt Water Table to keep the plasma dust down.
Computer Base unit with Mach3 CNC Controller Software installed, this is a basic computer but is perfectly adequate for running the Mach3 Software.
I will also supply the following software that I purchased :-
Sheetcam CNC Programming Software (Generates the Gcode for Plasma Cutting)
Vcarve 5.5 (Wood Router Software, costs £££ to buy)
Cut3D (Wood Router software to machine 3D objects)
Photocarve (Wood Router software to Vcarve photographs)
Machine will need to be collected by the buyer at there expense.
You will need a Transit / Luton van to collect the machine.
Machine can be viewed working and I will give the buyer a couple of hours tuition to get them up to speed before they take delivery.
Price £3500 ono
I will be willing to sell the machine without the Hypertherm Plasma if you do not have 3 phase electrics.
Price minus hypertherm Plasma Cutter £2300 ono
Thanks
Andy