hoezap
09-07-2012, 11:11 AM
Hello
thank you for entering inmy post
I'm working as simple CNCmachinist, but as soon as my English will be good I'd like to applyfor an engineering job and in the same company where I am
We make engines for powergenerators on cast-iron
I put an idea forwardregarding a step drill to make a 17mm hole and a 23mm recess,reducing one tool.
Looking at all the enginesthat we make I've found out that we could use the same tool for allthe engine cases, that is we could put this tool on 4 CNC millingmachines
I talked about this ideato an engineering manufacturing of my shift and at first time heliked my idea and he gave me the assent to write it down, after thathe came back to me and told me that it is too expensive and accordingto them doesn't worth doing it
I talked to my managerabout it and he told me that manufacturing engineering wasconsidering my idea, soIasked why they didn't let me to write it down but he didn't reply me.
Iused drawing and making this kind of tool inside the company, but fora big company where I work now I don't know all the procedure andwhether it worth or not doing it. They told me that they have to sayto the company in Germany, which is our tools provider, to make ablueprint and make a tool
Isthere in this forum any engineering who works for a big company likemine-one and knows this kind of procedure?
Thisis a small tool no longer than 100mm. May you tell me moro or lessthe cost of it?
Ineed to understand whether is thrue or not that my idea is not good
Anyfurther advice according it will be very appreciated
thankyou in advance for your help
thank you for entering inmy post
I'm working as simple CNCmachinist, but as soon as my English will be good I'd like to applyfor an engineering job and in the same company where I am
We make engines for powergenerators on cast-iron
I put an idea forwardregarding a step drill to make a 17mm hole and a 23mm recess,reducing one tool.
Looking at all the enginesthat we make I've found out that we could use the same tool for allthe engine cases, that is we could put this tool on 4 CNC millingmachines
I talked about this ideato an engineering manufacturing of my shift and at first time heliked my idea and he gave me the assent to write it down, after thathe came back to me and told me that it is too expensive and accordingto them doesn't worth doing it
I talked to my managerabout it and he told me that manufacturing engineering wasconsidering my idea, soIasked why they didn't let me to write it down but he didn't reply me.
Iused drawing and making this kind of tool inside the company, but fora big company where I work now I don't know all the procedure andwhether it worth or not doing it. They told me that they have to sayto the company in Germany, which is our tools provider, to make ablueprint and make a tool
Isthere in this forum any engineering who works for a big company likemine-one and knows this kind of procedure?
Thisis a small tool no longer than 100mm. May you tell me moro or lessthe cost of it?
Ineed to understand whether is thrue or not that my idea is not good
Anyfurther advice according it will be very appreciated
thankyou in advance for your help