dsc
10-10-2012, 01:33 PM
Gents,
I'm trying to build an L shaped box which has a z axis assembly mounted on it. Looking for someone who can CNC the following in MDF, plywood or alu (it's a prototype to try out an idea, so I'm trying to keep the costs down):
http://i1120.photobucket.com/albums/l496/dsc_MT/random/mdf_cutout.png
The plates will need holes for screws / bolts and a few larger holes for bearings. MDF / plywood would need to be 15mm, alu would be 10mm thick.
The above drawing is a rough estimate of how many plates are needed and the dimensions, I can of course provide more precise drawings for the job.
Regards,
dsc.
I'm trying to build an L shaped box which has a z axis assembly mounted on it. Looking for someone who can CNC the following in MDF, plywood or alu (it's a prototype to try out an idea, so I'm trying to keep the costs down):
http://i1120.photobucket.com/albums/l496/dsc_MT/random/mdf_cutout.png
The plates will need holes for screws / bolts and a few larger holes for bearings. MDF / plywood would need to be 15mm, alu would be 10mm thick.
The above drawing is a rough estimate of how many plates are needed and the dimensions, I can of course provide more precise drawings for the job.
Regards,
dsc.