cooliced
16-10-2012, 06:18 PM
Hi guys. I'm stumped at doing this right now as the mill is in storage waiting to be moved.
I'm after somebody making a cad drawing of the file I have attached into a 3d relief. Then milling it out of wax, so I can then silicone mould it. Will need to be about inch deep in total.
Like this
http://www.bristolbites.co.uk/wp-content/uploads/2011/04/kitchens-easter-chocolate-moulds.jpg
http://aboutharvest.com/wp-content/uploads/2012/02/Antique-Chocolate-Molds.jpg
wife wants to make some chocolate bits with mould of this design.
Thanks in advanced.
Stu
This is the design
http://i185.photobucket.com/albums/x99/amilady/download_zps54e7c860.png
I'm after somebody making a cad drawing of the file I have attached into a 3d relief. Then milling it out of wax, so I can then silicone mould it. Will need to be about inch deep in total.
Like this
http://www.bristolbites.co.uk/wp-content/uploads/2011/04/kitchens-easter-chocolate-moulds.jpg
http://aboutharvest.com/wp-content/uploads/2012/02/Antique-Chocolate-Molds.jpg
wife wants to make some chocolate bits with mould of this design.
Thanks in advanced.
Stu
This is the design
http://i185.photobucket.com/albums/x99/amilady/download_zps54e7c860.png