jcb121
22-10-2012, 06:53 PM
I've written a little guide for anyone wanting to get into 3d milling using solidworks.
I hope it helps some people and I would appreciate feedback and if this thread could be stickied.
use my guide at your own risk! double check the tool paths in mach!!!!!
https://docs.google.com/open?id=0B-O9d6n7isJ6a0Y3ekZrRmtvVEU
I advise downloading this and not viewing it in Google docs!!
links to post processor
https://docs.google.com/open?id=0B-O9d6n7isJ6OEZpaHBmV0h4TEE
I hope it helps some people and I would appreciate feedback and if this thread could be stickied.
use my guide at your own risk! double check the tool paths in mach!!!!!
https://docs.google.com/open?id=0B-O9d6n7isJ6a0Y3ekZrRmtvVEU
I advise downloading this and not viewing it in Google docs!!
links to post processor
https://docs.google.com/open?id=0B-O9d6n7isJ6OEZpaHBmV0h4TEE