Nick Butler
14-07-2013, 12:01 PM
Denford MIRAC CNC lathe.
Specification: Swing over Bed: 250mm (10”)
Maximum Turning Diameter: 160mm (6.25”)
Maximum turned length: 180mm (7”)
Spindle Bore: 21mm (0.8125”) No. 3 M.T.
Spindle Nose Type: A2 42mm (1.625”)
Spindle Speeds: 0 – 5000 R.P.M.
Feedrates: 0 – 1200mm/Minute
Spindle Motor: 1 H.P.
X axis travel: 85mm (3.375”)
Y axis travel: 200mm (8”)
Coolant capacity: 18 Litres
Machine resolution: 0.01mm (0.0004”)
Machine Weight: 320 Kg. (705Lbs.)
Electrical requirements: 240 Volt SINGLE PHASE
Machine Length: 1090mm (43”)
Machine Depth: 970mm (38.2”)
Machine Height: 625mm (24.6”)
Machine Features:
RS232 Port. Plug for external keyboard. Auxilliary 7 Pin socket.
(Serial Port, Parallel Port) Coolant pump, sump and drain valve.
Internal lighting above work area. Safety interlocked sliding door with window.
Internal and external jaws for 3 Jaw chuck. Chuck key.
4 brand new and 1 used quick release tool holders. Release key and tool clamp key.
Parting off tool with indexable carbide bit and holder.
Built in enhanced colour graphics display and membrane keyboard.
Floppy Disc Drive.
Emergency stop button.
Control Software has over 40 features to allow complete control and federate over-ride of 0 –150% Other features include:
Manual Data Input facility.
Internal and External screw cutting.
Tool nose radius compensation.
Metric or imperial Prgramming.
Circular and Linear Interpolation.
Canned Turning Cycles.Tool Offsets for 16 Tools
Dry Run facility.
Toolpaths Graphics in colour 2D or 3D display.
Program merging facility.
Jog mode with variable feedrates.
LAN communication if required.
Axis over-travel limits.
And many more (Contact me for full list)
Software and Complete Documentation:
MillCam Designer software. Post Processor Libraries
Denford Industrial Text Editor software. Denford Dongle
MIRAC Maintenance manual MIRAC operating software and backup disc.
Denford Lathe CAM Designer instruction Manual
Denford Mill CAM Designer 2 instruction Manual
Denford Industrial Text Editor Instruction Manual
Denford MIRAC offline programming instruction Manual which includes G Code and M Code descriptions and comprehensive screen displays descriptions.
MIRAC CNC Lathe Installation, Operation and maintenance manual.
Original Denford Technical Brochure.
I can lift the machine onto your transport. It will fit in a large estate car.
OFFERS INVITED.
e-mail: [email protected].
Phone: 01483 284114 (Work) and 01483 282627 (Home)
Specification: Swing over Bed: 250mm (10”)
Maximum Turning Diameter: 160mm (6.25”)
Maximum turned length: 180mm (7”)
Spindle Bore: 21mm (0.8125”) No. 3 M.T.
Spindle Nose Type: A2 42mm (1.625”)
Spindle Speeds: 0 – 5000 R.P.M.
Feedrates: 0 – 1200mm/Minute
Spindle Motor: 1 H.P.
X axis travel: 85mm (3.375”)
Y axis travel: 200mm (8”)
Coolant capacity: 18 Litres
Machine resolution: 0.01mm (0.0004”)
Machine Weight: 320 Kg. (705Lbs.)
Electrical requirements: 240 Volt SINGLE PHASE
Machine Length: 1090mm (43”)
Machine Depth: 970mm (38.2”)
Machine Height: 625mm (24.6”)
Machine Features:
RS232 Port. Plug for external keyboard. Auxilliary 7 Pin socket.
(Serial Port, Parallel Port) Coolant pump, sump and drain valve.
Internal lighting above work area. Safety interlocked sliding door with window.
Internal and external jaws for 3 Jaw chuck. Chuck key.
4 brand new and 1 used quick release tool holders. Release key and tool clamp key.
Parting off tool with indexable carbide bit and holder.
Built in enhanced colour graphics display and membrane keyboard.
Floppy Disc Drive.
Emergency stop button.
Control Software has over 40 features to allow complete control and federate over-ride of 0 –150% Other features include:
Manual Data Input facility.
Internal and External screw cutting.
Tool nose radius compensation.
Metric or imperial Prgramming.
Circular and Linear Interpolation.
Canned Turning Cycles.Tool Offsets for 16 Tools
Dry Run facility.
Toolpaths Graphics in colour 2D or 3D display.
Program merging facility.
Jog mode with variable feedrates.
LAN communication if required.
Axis over-travel limits.
And many more (Contact me for full list)
Software and Complete Documentation:
MillCam Designer software. Post Processor Libraries
Denford Industrial Text Editor software. Denford Dongle
MIRAC Maintenance manual MIRAC operating software and backup disc.
Denford Lathe CAM Designer instruction Manual
Denford Mill CAM Designer 2 instruction Manual
Denford Industrial Text Editor Instruction Manual
Denford MIRAC offline programming instruction Manual which includes G Code and M Code descriptions and comprehensive screen displays descriptions.
MIRAC CNC Lathe Installation, Operation and maintenance manual.
Original Denford Technical Brochure.
I can lift the machine onto your transport. It will fit in a large estate car.
OFFERS INVITED.
e-mail: [email protected].
Phone: 01483 284114 (Work) and 01483 282627 (Home)